Smartbox accessories

The EMM / EMX-1 Probe is used for measuring environmental values : Temeprature, humidity, air pressure, light level, 3D positioning and impacts. It is supporting Pt100 external temperature senzor. All measured data are sent through communication terminal via GPRS to AutoGPS Log Book application..

TCP/IP access module to control access for 1 door / bidirectionally /. 2 Wiegand inputs for RFID reader connection, exit button, door monitoring input, alarm input and NO/NC relay for a lock controlling.

TCP/IP access module to control access for up to 4 doors. 4 Wiegand inputs for RFID reader connection, 4 exit buttons, 4 doors monitoring inputs, 4 alarm inputs and 4 NO/NC relays for locks controlling.

SmartBox includes GPS tracker, EMX probe and li-ion battery – all in a small magnetic waterproof box. SmartBox monitors and transmits data about surrounding environment (temperature, humidity, air pressure, tilt and 3D orientation, G-force and impacts) and also about exact GPS location of the transport. When developing SmartBox our main focus was to make it easy use. That is why SmartBox can be easily fastened to the transport so that it can’t get lost and can be charged just by placing into the docking station.

EMMHUB3 serves as communication interface for up to 3 probes, power supply 8-36V DC, contains internal Li-ion battery 3.7V/ 2600mAh

Pipe Pressure Sensor • Applicable to Various Pipe • LoRaWAN® Wireless • Easy Configuration via NFC • 10 Years Battery Life

TCP/IP Access reader for access and entry control. Verification via fingerprint or card. Fingerprint over 9000 templates. Emarine cards up to 20 000 cards. Wiegand 26-66 bit.

Water Level Monitoring • LoRaWAN® Wireless • Easy Configuration via NFC • 10 Years Battery Life

GL200 Dry Pak Alligator Wallet

Patriot Dallas reader

3G & 4G router • 1x WAN • 1x LAN • PoE • MicroSD

SYSF203TPD Biometric reader, dual ID format for Emmarine 125kHz and Mifare 125kHz cards