Attendance system

EMM003Q probe with USB connector, connects with Queclink GPS unit and is designed to measure temperature, light intensity, humidity, air preassure and impacts. Supports 3D spacial orientation. GPS communication unit sends all data directly to our Auto-GPS application, where are sent data processed.

LTE GSM/GPS komunikační jednotka PATRIOT XII s externí anténou pro pevnou instalaci pro zabezpečení vozidla se záznamem GPS souřadnic a on-line posíláním přes GSM síť na server pro zpracování provozu vozidla do EKJ. Obsahuje 3D gravitační senzor, záložní akumulátor a komunikační vstupy a výstupy pro různé příslušenství jako je Dallas & RFID čtečka, průtokoměr, palivová měrná tyč, snímač teploty, CAN bus, atd.

GL200 EMM USB kabel pro propojení sondy EMM001 s GPS jednotkou GL200, délky 35, 65 a 95cm.

4G LTE FDD GPS unit for fixed installation, internal GSM/WCDMA/LTE and GPS ceramic antenna, backup 140mAh battery, high power supply range 9 to 72VDC, dimensions 89 x 37 x 12mm, IP65 protection.

EMMHUB3Lite serves as communication interface for up to 3 probes, power supply 8-36V DC, Version Lite has no standby battery.

The EMM / EMX-1 Probe is used for measuring environmental values : Temeprature, humidity, air pressure, light level, 3D positioning and impacts. It is supporting Pt100 external temperature senzor. All measured data are sent through communication terminal via GPRS to AutoGPS Log Book application..

SmartBox includes GPS tracker, EMX probe and li-ion battery – all in a small magnetic waterproof box. SmartBox monitors and transmits data about surrounding environment (temperature, humidity, air pressure, tilt and 3D orientation, G-force and impacts) and also about exact GPS location of the transport. When developing SmartBox our main focus was to make it easy use. That is why SmartBox can be easily fastened to the transport so that it can’t get lost and can be charged just by placing into the docking station. Thanks to the Bluetooth module inside the device, there are many ways to expand the Smartbox 2 Max unit with additional functions – using external sensors with Bluetooth support.

3G • 4G • WiFi • PoE • Industrial Cellular Router

SmartBox je zařízení kombinující GPS tracker, sondu EMM a výkonný akumulátor. SmartBox tak monitoruje okolní prostředí (teplota, vlhkost, tlak vzduchu, úroveň osvětlení, 3D orientaci a otřesy) a zároveň sleduje GPS polohu transportu. Při vývoji SmartBoxu bylo myšleno i na jednoduchost jeho využití, a tak SmartBox vyniká řadou možností jednoduchého uchycení k transportu a jeho dobíjení je řešeno elegantní nabíjecí stanicí, do které jen SmartBox vložíme.

SmartBox includes GPS tracker, EMX probe and li-ion battery – all in a small magnetic waterproof box. SmartBox monitors and transmits data about surrounding environment (temperature, humidity, air pressure, tilt and 3D orientation, G-force and impacts) and also about exact GPS location of the transport. When developing SmartBox our main focus was to make it easy use. That is why SmartBox can be easily fastened to the transport so that it can’t get lost and can be charged just by placing into the docking station.

External GPS antenna for tracker GL200. Internal GPS antenna of the GL200 is turned off after connection of the external antena.

TCP/IP access module to control access for 2 doors / bidirectionally /. 2 Wiegand inputs for RFID reader connection, 2 exit buttons, 2 doors monitoring inputs, 2 alarm inputs and 2 NO/NC relays for locks controlling.

Feature-Rich SensorHub for Connecting Sensors • Non-rechargeable, built-in 19000 mAh replaceable Li-SOCl2 battery

Holder with magnet for holding the GPS Tracker GL300 on the metal surface.