Eurosat CS, spol s r.o.

Neodym magnet NdFeB je složen z 6ks magnetických jáder NdFeB, rozměr Ø43 x 6mm

The EMM / EMX-1 Probe is used for measuring environmental values : Temeprature, humidity, air pressure, light level, 3D positioning and impacts. It is supporting Pt100 external temperature senzor. All measured data are sent through communication terminal via GPRS to AutoGPS Log Book application..

Motomon SetUp fee ( one time charge )

TCP/IP access module to control access for 2 doors / bidirectionally /. 2 Wiegand inputs for RFID reader connection, 2 exit buttons, 2 doors monitoring inputs, 2 alarm inputs and 2 NO/NC relays for locks controlling.

Temperature detection range (-50 ~ 200°C) • Extreme Temperature Measurement • LoRaWAN® Wireless • Easy Configuration via NFC • 10 Years Battery Life

EMM003Q probe with USB connector, connects with Queclink GPS unit and is designed to measure temperature, light intensity, humidity, air preassure and impacts. Supports 3D spacial orientation. GPS communication unit sends all data directly to our Auto-GPS application, where are sent data processed.

3G • 4G • WiFi • PoE • Industrial Cellular Router

Cable probe Probe EMM001 with connector into the box G2BOXPW, cable length 3 meters.

Docking station for SmartBox with 5VDC / 1A power supply

GL200 EMM USB kabel pro propojení sondy EMM001 s GPS jednotkou GL200, délky 35, 65 a 95cm.

OBDII extension cable - lenght 140cm with lowprofile "L" contector for easy instalation of the OBDII GPS units.

SYSF203TPD Biometric reader, dual ID format for Emmarine 125kHz and Mifare 125kHz cards