GPS Hardware

SmartBox je zařízení kombinující GPS tracker, sondu EMM a výkonný akumulátor. SmartBox tak monitoruje okolní prostředí (teplota, vlhkost, tlak vzduchu, úroveň osvětlení, 3D orientaci a otřesy) a zároveň sleduje GPS polohu transportu. Při vývoji SmartBoxu bylo myšleno i na jednoduchost jeho využití, a tak SmartBox vyniká řadou možností jednoduchého uchycení k transportu a jeho dobíjení je řešeno elegantní nabíjecí stanicí, do které jen SmartBox vložíme.

GPRS terminal adds an altitude and a GPS position and sends all the information to the IoT server in a real time via mobile data. Servers process the data, allowing to view it in the graphs, maps or the generated alerts.

Biometrical terminal SYSDO for attendance and access control fully equipped for recording and access control persons using facial recognition, biometric fingerprint ID chip or ID code. The reader supports TCP / IP P2P communication via Ethernet port, LCD touch screen communication port Wiegand, USB. The reader is ready and configured with the account into an online web application SYSDO where the reader can be completely configured by the user.

4G LTE FDD GPS unit for fixed installation, internal GSM/WCDMA/LTE and GPS ceramic antenna, backup 140mAh battery, high power supply range 9 to 72VDC, dimensions 89 x 37 x 12mm, IP65 protection.

Holder with magnet for holding the GPS Tracker GL300 on the metal surface.

External GPS antenna for tracker GL200. Internal GPS antenna of the GL200 is turned off after connection of the external antena.

3G • 4G • WiFi • PoE • Industrial Cellular Router

Magnetic Contact Switch • Security Alarm for Door Opening • IP67 Waterproof • LoRaWAN® Wireless • 5/10 Years Battery Life • NFC for Configuring

The EMM / EMX-1 Probe is used for measuring environmental values : Temeprature, humidity, air pressure, light level, 3D positioning and impacts. It is supporting Pt100 external temperature senzor. All measured data are sent through communication terminal via GPRS to AutoGPS Log Book application..

TCP/IP access module to control access for up to 4 doors. 4 Wiegand inputs for RFID reader connection, 4 exit buttons, 4 doors monitoring inputs, 4 alarm inputs and 4 NO/NC relays for locks controlling.

TCP/IP Access reader for access and entry control. Verification via RFID card or code. Emarine cards up to 20 000 cards.

TCP/IP Access reader for access and entry control. Verification via fingerprint or card. Fingerprint over 9000 templates. Emarine cards up to 20 000 cards. Wiegand 26-66 bit.

Temperature detection range (-200 ~ 50°C) • Extreme Temperature Measurement • LoRaWAN® Wireless • Easy Configuration via NFC • 10 Years Battery Life

Napájecí zdroj 5VDC 2.1A, 1.4m, konektor 2.1x5.5 delší SONOCO

1 month licensing with Vodafone 5MB international data plan