server: a8d2-docker1.eurosat.cz

Repair page

Call +305-969-5566

Questions & Support eshop@motomon.com

Category

Searching

Quick add to cart

Log in
New customer? Register

0 Cart

Bestsellers

SYSA21

TCP/IP access module to control access for 1 door / bidirectionally /. 2 Wiegand inputs for RFID rea
SYSFX9 SYSDO attendance and access terminal

SYSF203TPD Biometric reader, dual ID format for Emmarine 125kHz and Mifare 125kHz cards
SYSA2PRO PCB

TCP/IP access module to control access for up to 4 doors. 4 Wiegand inputs for RFID reader connectio

Special offer

GL500M Držák pro GL500MG/501MG

Magnetický držák pro GL501MG, čtyři silné magnety
TEMS Cloud monitoring
UR35-L04EU-G-P-W - Industrial Cellular Router (3G, 4G, GPS, WiFi, PoE, 1xWAN, 4xLAN)

3G • 4G • GPS • WiFi • PoE • 1 x WAN • 4xLAN
GL419U GPS LTE tracker

4G LTE FDD GPS unit for fixed installation, internal GSM/WCDMA/LTE and GPS ceramic antenna, backup 1
GL500M Magnetický držák pro GL500MG/501MG

Pouzdro s magnety pro GPS jednotku GL300WB/GL300LTE, krytí IP67, dva silné magnety

> GPS Hardware > GPS units > GV300CAN

GV300CAN

Basic information:	The GV300CAN is Queclink’s third generation vehicle product and our most popular device to date. It is the foundation of Queclink’s proprietary @Track protocol, which the majority of our products are based on. Since 2011, customers have trusted and relied on this product. Its lasting appeal derives from both its flexibility and its ability to be used in a wide variety of heavy truck and car management applications. Its wide range of pre-integrated accessories provided either by Queclink, or our carefully selected partners, allows it to support additional capabilities such as CAN data capture, RS232 data acquisition and I/O expansion via our extender products.
	GPS unit For fixed installation Identification of persons DALLAS chip Identification of persons RFID Backup power Accumulator
Order code:	GV300CAN
Internal code:	S100-0475

Availability:	on order

Quantity:
Add to cart

GV300CAN

The GV300CAN is Queclink’s third generation vehicle product and our most popular device to date. It is the foundation of Queclink’s proprietary @Track protocol, which the majority of our products are based on. Since 2011, customers have trusted and relied on this product. Its lasting appeal derives from both its flexibility and its ability to be used in a wide variety of heavy truck and car management applications. Its wide range of pre-integrated accessories provided either by Queclink, or our carefully selected partners, allows it to support additional capabilities such as CAN data capture, RS232 data acquisition and I/O expansion via our extender products.

Properties

Best-seller: a large number of successful GV300 deployments worldwide
Multiple interfaces, including a RS232 serial port, as well as digital and analog I/O
Supports various accessories, such as CAN adapter as well as temperature and humidity sensors
Ideal for fleet management, cold chain logistics and transportation monitoring

Specification

GSM Specifications

Frequency	GSM: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz)
GPRS	GPRS multi-slot class 10 GPRS mobile station class B

GNSS Specifications

GNSS Type	u-blox All-in-One GPS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Dimensions	80 x 48 x 25mm 3.15”(L) x 1.89”(W) x 0.98”(H)
Weight	72g (2.54oz)
Backup Battery	Li-Polymer, 250 mAh
Operating Voltage	8V to 32V DC
Operating Temperature	-30℃ ~ +80℃ -40℃ ~ +80℃ for storage
Operating Humidity	0%~95% non-condensing

Interfaces

Digital Inputs	1 positive trigger input for ignition detection 2 negative trigger inputs for normal use
Analog Input	1 analogue input with selectable input voltage range(0V-12V or 0V-30V)
Digital Outputs	1 digital outputs, open drain, 150 mA max drive current
Latched Digital Output	1 digital output with internal latch circuit, open drain, 150 mA max drive current
Serial Port	1 RS232 serial port on 16 pin molex type connector, for external devices (GARMIN protocol support)
1-wire Interface	Support 1-wire temprature sensor and iButoon driver ID
Vehicle CANBus	Support CANBus Support J1708 Bus
GSM Antenna	Internal only
GNSS Antenna	Internal antenna and optional external antenna
BLE Antenna	Internal only
LED Indicators	CEL, GNSS, CAN
Mini USB Interface	Used for upgrading and debugging

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences	Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Low Power Alarm	Alarm when backup battery is low
Power On Report	Report when the device is powered on
Power Off Report	Report when the device is powered off
Motion Detection	Alarm based on internal 3-aix accelerometer
Special Alarm	Special alarm based on digital/analog inputs
Power Supply Monitoring	Report of external power status
Tow Alarm	Alarm for tow event in ignition-off state
Speeed Alarm	Flexible speed monitoring for unusual speed alarm
Remote Control	OTA control of digital outputs
Fuel Level Sensing	Configurable support for fuel level sensing using the vehicle’s built-in fuel sensor or gauge
Temperature Detection	Alarm for temperature detection
Driving Behavior Monitoring	Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection	Accident data collection for reconstruction and analysis